tower process
英 [ˈtaʊə(r) ˈprəʊses]
美 [ˈtaʊər ˈprɑːses]
网络 塔式法
双语例句
- The comprehensive technology for enhancement of cooling, screening and dust-recovery in production of compound fertilizer by prilling tower process
高塔复合肥加强冷却、筛分与粉尘回收的综合技术 - At present, although some CNC Automatic line to enter the tower industry, which greatly raised the level of the Eiffel Tower production process and production efficiency.
目前，虽然一些数控自动线进入了铁塔行业，大大提高了铁塔生产的工艺水平和生产效率。 - The utility model is characterized in that a single tower process flow that only an adsorption tower is used for producing oxygen is adopted.
该装置的特点是只用一个吸附塔生产氧气的单塔工艺流程。 - The effects of Adding Auxiliary Stuff on the Eutectic Value of Reducing Nitrogen Content in Melting Tower Granulation Process
不同辅料对高塔熔体造粒工艺降氮共熔值的影响 - The up-flowing multi-phase waste-water processing oxidation tower can process biorefractory wastewater, and does not need to be provided with a mechanical stirring device.
本实用新型能处理难生化降解废水。无需安装机械搅拌设备； - The packed tower process not only used for chemical industry, it is also widely used for purifying low concentration industrial waste gases.
填料塔洗涤吸收净化工艺不单应用在化工领域，在低浓度工业废气净化方面也能很好地发挥作用。 - Formulation and technology of low-density concentrated laundry powder by tower process were studied.
采用高塔成型技术研究了低密度浓缩洗衣粉的配方和工艺。 - Analog calculation of az eo tropic rectification tower in the process of anhydrous alcohol was done.
对无水酒精恒沸精馏工艺中恒沸精馏塔进行模拟计算。 - As an example, the feasibility of a methanol rectification tower in rectisol process and simple operation units has been analyzed and worked out with index method, as well as the feasible variation range of some uncertain parameters has been determined.
以简单化工操作单元和某厂低温甲醇洗装置的甲醇精馏塔为例，说明如何采用顶点法求解化工装置弹性系数，进行弹性分析，确定不确定参数真实可行的变化范围。 - The design of DMT pressure esterification tower of Witten process
Witten法DMT加压酯化反应塔的设计 - The feasibility of using one tower process is verified by the simulation in Aspen Plus.
经采用aspenplus进行模拟，确定了一塔流程的可行性； - The above problems were solved by using the lower tower pressurized blowback process and the production resumed.
利用往下塔充压反吹的方法，解决了问题，恢复了生产。 - Effect of EG circulation in esterification process tower on esterification process
酯化工艺塔EG循环量对酯化工艺的影响 - Application of Dual-tower Process Flow on Light Hydrocarbon Recovery Devices
双塔流程在轻烃回收装置中的应用 - Ethylene Fractionation Tower Advanced Process Control
乙烯精馏塔先进控制 - Treating Blocking of the Main Heat Exchanger Using the Lower Tower Pressurized Blowback Process
下塔充压反吹法处理主换热器堵塞 - Temporary saddle design of large tower vessel is a very important part of large tower vessel design process.
大型塔器的临时鞍座是大型塔器设计中非常重要的一个方面。 - The experiment equipment of heat-exchange packed tower and its process principle are introduced.
本文介绍了换热塔实验装置及该装置的过程原理。 - Analysis and Optimization of the Removing C_9 Tower Distillation Process in Pyrolysis Gasoline Hydrogenation Plant
汽油加氢装置脱碳九塔精馏过程的分析和优化 - The experimental results show that LST-1 is stable in quick and high temperature spray drying and is suitable for using in the detergent slurry preparation for spray drying tower process.
结果表明：LST-1在高温、快速干燥过程中性质稳定，适用于洗衣粉高塔喷粉前配料工艺。 - Application of Dual Tower Regeneration Process in CO_ 2 Removal System of Ammonia Plant
双塔再生工艺在合成氨厂脱碳系统中的应用 - Corrosion Occurred in Equipment on Top of Tower in Process of Refining Russian Oil and Protection Measures
掺炼俄罗斯原油对塔顶设备腐蚀及防护措施 - This article analyzed through the model simulation has arched the tower assembling process each working procedure, It has affected the tower synchronization construction the key working procedure to carry on the stress analysis, and has arched the tower to close up smoothly lays the corresponding rationale.
本文通过模型仿真分析了拱塔拼装过程的每一工序，对影响塔梁同步施工的重点工序进行了受力分析，为拱塔的顺利合拢奠定相应的理论基础。 - The thesis puts forward a process of decomposition analysis for urea reactor explosion that depends on plywood wrapped type urea tower detonation process which launched simulation analysis.
本文针对层板包扎式尿素塔爆炸过程展开模拟分析，提出了将尿素塔爆炸过程分解分析的方式。 - Design is a creative stage in the tower crane development process, to improve machine performance and reduce product cost and shorten the product development cycle, plays a crucial role.
塔式起重机设计是整机开发过程中的创造性阶段，对于提高整机性能、降低产品成本和缩短产品开发周期，发挥着关键作用。 - The closed cooling tower heat transfer process with the largest difference between its evaporation processes directly on the heat exchanger surface.
该换热过程与闭式冷却塔的最大区别在于其蒸发过程直接在换热器表面进行。 - But the home position assembling construction also has many difficulties, how is the key to controls in the main tower hoisting process the measuring error.
但是原位拼装施工也存在着许多难点，关键就是如何控制主塔吊装过程中的测量误差。 - The thermodynamic method NRTL of every system in this process is confirmed through comparing the values of simulation with the experimental data. Secondly, each tower in the process is simulated and the better operation parameters are gotten.
将模拟值和实验值进行比较，确定了合适的热力学计算方法为NRTL。其次，对单塔的模拟计算得到了每个塔合适的操作参数。